Bonded bearings are anti-vibration bushes designed to provide protection from shock and vibration. They are often designed to avoid wear and remove the need for lubrication, ensuring low maintenance requirements.
Bonded bearings work by eliminating high frequencies while supporting high loads during operation. They typically consist of two concentric sleeves with rubber bonded between them. The rubber is usually pre-stressed to give dynamic strength and maximum durability. They are designed to provide noise and vibration isolation, accommodate misalignment and protect from shock loads.
Bonded bearings come in two main types: fully bonded and semi-bonded variants. Fully bonded bearings are made with rubber bonded to the inner and outer metal tubes. Semi-bonded types are usually manufactured with the rubber bonded to the inner tube and attached to the outer.
Bonded bearings are used in various applications including:
(Harga yang ditampilkan tidak termasuk PPN)
|Rincian Komponen||Brand||Stock||Inside Diameter||Outside Diameter||Overall Length||Outer Bush Length|
Rubber-metal bonded bush,21mm Lx8.2mm ID
Rubber-metal bonded bush,42mm Lx20mm ID
Rubber-metal bonded bush,28mm Lx16mm ID
Rubber-metal bonded bush,23mm Lx10mm ID
Rubber-metal bonded bush,44mm Lx12mm ID
Rubber-metal bonded bush,38mm Lx18mm ID
Rubber-metal bonded bush,40mm Lx12mm ID
Rubber-metal bonded bush,49mm Lx10mm ID
Rubber-metal bonded bush,24mm Lx12mm ID
Rubber-metal bonded bush,38mm Lx12mm ID